FireCast Resin is the latest development from the MadeSolid Lab. This resin is designed specifically for investment casting resin. Prints burn out clean with little to no ash. There is little thermal expansion during the heating phase.
Shrinkage is minimal from printing and post-curing until burnout. Many SLA and DLP printers are compatible with FireCast Resin including the Deep Imager 5 and Form1.
The resin is less viscous than most other resins and is easier to clean out from vats and off prints. It’s ideal for anyone who wants to change their printer to allow for casting parts
FireCast Resin has two burn stages which are necessary for the cleanest burnout. The first stage is the initial combustion of the resin, where the majority of material is removed.
The second stage serves to remove any residual carbon from the original outgassing phase.
// Satin Cast // Satin Cast Xtreme // Ultra-Vest
Printing and Burnout Tips
// Be sure prints are fully cleaned in IPA and post-cured with UV light (Cleaning Tips) // If your print feels soft or spongy, expose the print to more UV light to harden it. // Please follow the heat schedule. Incorrect heat schedule can expand and may damage your final product.